LogoLutz

Drum pump HC 42 for highly corrosive chemicals

Lutz Drum and Container Pumps
Drum pump HC 42 for highly corrosive chemicals
Pump temp HC 42-R-SL
with motor MA II 5

Liquid examples:
Bromine, chlorosulfonic acid, chlorine water, hydrofluoric acid, hydrochloric acid, etc.

Features:

  • Suitable for highly corrosive chemicals in non-explosive areas.
  • Optional with electric or air driven motors 
  • No grease fillings
  • Optimized drum drainage 
  • Modular, service friendly design

 

Sealing system:
Sealless construction (SL)

 

Type of impeller:
Axial-flow rotor (R) for high flow rates.

Immersion length:
1000 and 1200 mm available from stock
(Special lengths 200-2500 mm on request)

Benefit:

  • Sealless version cannot fail by dry running
  • Lube-free, thus no contamination of the liquid 
  • High resistant carbon shaft bearing
  • Easy maintenance without special tools

Motor MA II 3 / MA II 5 / MA II 7

ma

Solid and powerful universal motor with double wall housing suitable for pumping aqueous to light viscous, aggressive and outgassing acids and caustics.

  • Robust and powerful
  • Double wall housing protects inner parts from corrosion
  • Externally ventilated
  • 230V/50Hz, 110-120V/50-60Hz, 42V, 24V, optionally with 460, 575 and 795 W, protection class IP 54


Motor MI 4 / MI 4-E

mi

Small and lightweight universal motor suitable for pumping thin-bodied to slightly viscous acids, alkalis and solutions.

  • Light and convenient
  • Optionally with infinitely variable speed controller for a controlled flow rate
  • Internally ventilated
  • 230V/50Hz, 110-120V/50-60Hz, 500W, protection class IP 24

Motor MD-1 / MD-2

MD

Compact compressed air motor for handling neutral and aggressive liquids.

  • Overload-proof
  • Optionally with (MD-2) / without (MD-1) manual operation
  • Delivery flow is easy to control
  • 400 W at 6 bar operating pressure,
    operating range from 3 – 6 bar

Motor B4/GT

B4/GT   

Reliable and persistant three-phase gear motor suitable for pumping thin-bodied to slightly viscous liquids in plant construction and stationary use.

  • Robust & durable
  • Especially smooth and quiet operation
  • Maintenance-friendly
  • 230/400V, 50 Hz, 750W, protection class IP 54
  • Efficiency level IE 2 
  • Special models (voltages, frequencies, type of protection, etc.) available

x

Materials HC-SL
Housing: HC-22 (2.4602)
Seals: Viton® (FEP coated)
Mechanical seal:  -
Bearing:  ETFE/Carbon
Drive shaft:  HC-4 (2.4610)
Impeller:  ETFE
Type of impeller:  Axial-flow (R)
Nominal diameter: 42 mm

Temperature of medium:

 up to 120 °C 
Hose connection:  G 1 1/4 male 
Length:  1000 / 1200 mm 
   
Operating data Axial-flow (R)
Delivery rate:* up to 210 l/min 
Delivery head:* up to 13 m wc 
Viscosity:** up to 550 mPas 

* determined with water at 20°C
** determined with oil

Fig. 1: Pump tube HC 42-R-SL with motor MA II 5

SeparatorLine

More Information:

Link:
http://www.lutz-pumpen.com/desktopdefault.aspx/tabid-128/72_read-17/